
Most commercial facilities have procedures designed to protect people during a fire. Far fewer have a detailed plan for what happens to the building and the operation once the immediate emergency is under control.
A commercial fire recovery plan establishes the contacts, authority, property information, operational priorities and recovery procedures your organization will need after a fire. It complements, not replaces, your life safety and evacuation plans.
For facility leaders, the question is not only, “Can everyone get out safely?”
It is also:
“Once emergency officials release the property, how will we begin getting the operation back?”
Short on time? Download the Commercial Fire Recovery Readiness Checklist(opens in new tab) and review it with your team.
Fire prevention and fire recovery planning are different
Fire prevention programs focus on reducing the likelihood of a fire and protecting occupants when an emergency occurs.
Recovery planning focuses on what happens afterward.
A commercial fire can create several interconnected issues:
- Direct fire damage
- Smoke and soot contamination
- Water from sprinklers or firefighting operations
- Damage to electrical or mechanical systems
- HVAC contamination
- Damaged inventory or equipment
- Compromised building materials
- Restricted access
- Displaced employees, tenants, guests, patients or students
- Extended business interruption
A strong recovery plan gives the people managing those issues a starting point before they are operating under emergency conditions.
1. Establish who has authority to make decisions
One of the easiest ways to lose time after an emergency is not knowing who can approve what.
Your plan should identify:
- Incident leader
- Facility/engineering lead
- Operations representative
- Risk or insurance contact
- Executive decision-maker
- Property owner or asset-management representative
- Security contact
- IT representative
- Communications representative
- Emergency restoration partner
- Insurance broker/carrier/adjuster contacts, as appropriate
Also establish approval thresholds.
- Who can authorize emergency mitigation?
- Who can approve after-hours access?
- Who can release purchase orders?
- Who needs to approve significant scope changes?
Working through those questions before a fire can eliminate unnecessary decision delays during recovery.
2. Document the property information responders may need
Your restoration team should not have to learn the building from scratch during an emergency.
Maintain current information regarding:
- Building address and access instructions
- Emergency entrances
- Security procedures
- Loading docks
- Utility information
- Mechanical rooms
- Electrical rooms
- Fire protection systems
- Roof access
- Elevators
- Critical equipment
- Restricted areas
- Hazardous-material locations where applicable
- Floor plans
- Key vendor contacts
- After-hours contacts
For portfolios, keep this information organized by property.
The goal is simple: make critical building information accessible before someone needs it at 2:00 a.m.
3. Determine which areas are operationally critical
Not every square foot has the same business impact.
Before an incident, identify the areas where downtime creates the greatest consequences.
For a hotel, that could include guest floors, central plant equipment, kitchens or laundry operations.
For a hospital, it could include emergency, surgical, imaging or critical-care environments.
For a manufacturing operation, it may be a production line, electrical infrastructure or specialized machinery.
For a commercial office property, it could be building-wide HVAC, elevators, electrical systems or shared tenant spaces.
For a data center, the priorities may center on power, cooling and critical infrastructure.
This information can help the recovery team understand the operation—not simply the damage.
4. Identify dependencies between building systems and operations
A room may appear untouched by flames and still be affected operationally.
Ask:
- Which areas share air-handling systems?
- Which tenants rely on common electrical systems?
- What operations depend on the same mechanical room?
- Where are network and telecommunications systems located?
- Which equipment has specialized power or environmental requirements?
- What areas cannot operate if an adjacent space is unavailable?
Commercial buildings operate as systems.
Your recovery plan should reflect those dependencies.
5. Plan for smoke, soot and suppression water, not only flames
Fire damage rarely ends at the visible burn area.
BMS CAT’s fire restoration process includes assessment of fire, smoke and soot damage as well as removal and drying of water resulting from firefighting efforts.
Smoke can also create concerns for HVAC systems. BMS CAT recommends attention to HVAC systems contaminated by smoke or fire damage before they are returned to service, since air-handling systems can redistribute pollutants if contamination is present.
Your plan should therefore account for assessment of:
- Adjacent areas
- HVAC and ductwork
- Above-ceiling spaces
- Contents
- Electronics
- Inventory
- Documents
- Porous building materials
- Water-affected assemblies
- Mechanical and electrical equipment
6. Establish a communication plan
One of the most important responsibilities after a commercial loss is keeping multiple groups informed.
Determine in advance how you will communicate with:
- Employees
- Tenants
- Guests
- Patients or families
- Students and staff
- Vendors
- Ownership
- Executive leadership
- Insurance representatives
- Customers
- Regulators, where applicable
Internally, establish a consistent recovery update.
A useful status report might include:
- Safety/access status
- Areas affected
- Areas operational
- Work underway
- Major decisions required
- Estimated next milestone
- Risks or constraints
- Next update time
Communication does not restore the building, but it can significantly improve how the recovery is managed.
7. Identify your restoration partner before the emergency
An active fire loss is not an ideal time to begin researching restoration companies.
Ask prospective partners:
- Do you provide 24/7 response?
- Can you manage commercial and large losses?
- Can you handle both mitigation and reconstruction?
- How will updates be communicated?
- Can you support multiple affected locations?
- How are critical areas prioritized?
- What information should we provide in advance?
- Do you offer pre-loss facility walkthroughs?
- Who becomes our point of contact?
BMS CAT’s Priority Disaster Response Program is designed around this kind of advance planning. The program includes facility walkthroughs, identifying priorities, setting expectations and documenting procedures before an emergency occurs.
Get a pre-loss facility walkthrough
Through the Priority Disaster Response Program, BMS CAT walks your property with your team, documents critical areas and contacts, and sets response priorities before an emergency happens.
Commercial Fire Recovery Planning Checklist
Before Fire Prevention Week ends, determine whether your organization can answer each of these questions:
- Who has authority to activate emergency restoration services?
- Is the 24-hour contact list current?
- Is critical property information documented?
- Are facility access requirements documented?
- Have critical operational areas been prioritized?
- Are important building-system dependencies understood?
- Is the insurance contact information current?
- Is there a communication/escalation plan?
- Is an emergency restoration partner already identified?
- Has that partner seen the property before an emergency?
If several answers are “no,” your fire-prevention program may be stronger than your fire-recovery readiness.
Get the printable checklist
Download the Commercial Fire Recovery Readiness Checklist to share with your facility, risk and operations teams.
Frequently Asked Questions
What is a commercial fire recovery plan?
It is a documented plan for coordinating property recovery and business continuity after a fire, including contacts, roles, building information, operational priorities and emergency vendors.
Is a fire recovery plan the same as an evacuation plan?
No. Evacuation and life-safety plans focus primarily on protecting people during an emergency. A recovery plan addresses the facility and business operations after the immediate emergency has been controlled.
When should a restoration company become involved?
Once access is permitted and it is appropriate to begin property recovery activities, early coordination can help the facility team establish the scope, priorities and recovery sequence. Occupants should not re-enter until authorities allow it.
Should every building in a portfolio have its own plan?
Each location should at minimum have building-specific information, contacts and operational priorities, even when the organization uses a portfolio-wide emergency response framework.
What is the most important information to document?
Start with contacts, authority, access, building systems, critical spaces, utilities, emergency vendors and operational priorities.
Be Prepared for What Happens Next
Fire Prevention Week is a good time to review more than extinguishers, alarms and evacuation procedures.
Ask one additional question:
If a fire happened tonight, would our team know how to start the recovery tomorrow?
BMS CAT works with commercial organizations to establish response priorities and facility information before an emergency through its Priority Disaster Response Program.
Download the Commercial Fire Recovery Readiness Checklist »(opens in new tab)